Eurotub 1000g D190

This Eurotub is a high quality in-mould label (IML) standard tub for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress. The corresponding 1kg lid is only availabe in a thermo formed version from Berry Superfos.


Eurotub is a high quality spreads and margarine IML tub.

General

MaterialPlastic. Plastic - PP
Surface Finish
IML-Label
MarketEating, Drinking. Food
Market - SegmentFood
Market - End UseButter, Spreads
Bramlage Market(s)
  • Food
Manufacturing Locations
  • Bramlage Germany (Celle)
Manufacturing TechnologyIML - In-Mould Labelling

Physical Data

Height84 mm
Length169.7 mm
Width132.7 mm
Weight28.7 g

Volume

Volume - Nominal1000 ml
Volume - Overflow1210 ml

See also

The Eurotub and Eurotlid are a high quality in-mould labeled (IML) standard packaging for spreads and yellow fats. For maximum flexibility on filling lines, the 250g D153, the 400g D153 and the 500g D153 Eurotubs fit to this D153 Eurolid, making them fully interchangeable. The corresponding containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

The Eurotub and Eurotlid are a high quality in-mould labeled (IML) standard packaging for spreads and yellow fats. For maximum flexibility on filling lines, the 250g D133 and 400g D133 Eurotubs fit to this D133 Eurolid, making them fully interchangeable. The corresponding containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

Eurotub 250g D133

The Eurotub and Eurotlid are a high quality in-mould label (IML) standard tub and lid for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. For maximum flexibility on filling lines, the 250g, 400g and 500g packs fit a single lid, making them fully interchangeable. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

Eurotub 250g D153

The Eurotub and Eurotlid are a high quality in-mould label (IML) standard tub and lid for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. For maximum flexibility on filling lines, the 250g, 400g and 500g packs fit a single lid, making them fully interchangeable. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

The Eurotub and Eurotlid are a high quality in-mould label (IML) standard tub and lid for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. For maximum flexibility on filling lines, the 250g, 400g and 500g packs fit a single lid, making them fully interchangeable. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

The Eurotub and Eurotlid are a high quality in-mould label (IML) standard tub and lid for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. For maximum flexibility on filling lines, the 250g, 400g and 500g packs fit a single lid, making them fully interchangeable. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

The Eurotub and Eurotlid are a high quality in-mould label (IML) standard tub and lid for spreads and yellow fats. The new range offers four sizes from 250g to 1kg. For maximum flexibility on filling lines, the 250g, 400g and 500g packs fit a single lid, making them fully interchangeable. The containers are injection moulded in polypropylene and the in-mould labelling enables multi-coloured and intricate designs to be created that cover the entire area of the packs. This produces a level of finish and detail that could not be achieved by on-pack printing to project a quality image and effective brand positioning. Labels can also be supplied with a metal-effect finish or incorporating a barrier to prevent oxygen ingress.

  • Frank Robledano Espín
  • Product -> RPC Global Product
  • English
  • Created 10 Jan 2019
  • Modified 19 Dec 2019
  • Hits 1400